WEICON Thread Sealing Lock AN 302-45

  1. Home
  2. Products
  3. Adhesive Sealants

WEICONLOCK® AN 302-45 Pipe and thread sealing

WEICON Thread Sealing Lock AN 302-45

Pipe and thread sealing for coarse threads| DVGW approval

high viscosity · medium strength · disassembly with normal tools

Surface pre-treatment

To achieve optimum results, the mounting parts should be degreased and cleaned, e.g. with WEICON Surface (roughen the surfaces, if required). WEICONLOCK can also be used on uncleaned surfaces, e.g. screws as delivered. However, the cleaner the surface, the better the results achieved.

Processing

WEICONLOCK is applied evenly straight from the Pen with the help of the dosing tip; avoid direct contact between dosing tip/metal. Apply WEICONLOCK to the thread in circles. Screw the pipe thread together and tighten it to the desired alignment. When used as flange sealing, apply a continuous bead to one flange side, then assemble parts quickly and screw tight. Do not pour any WEICONLOCK back into the bottle that has already come into contact with metal. Even extremely small metal particles cause the adhesive to cure inside the bottle. Therefore, in serial production, the use of dosing devices is recommended.

Adhesive Sealants